Compact flow control valve, exhaust air control (standard), R 3/8", tube 12 mm, -0.95 bar

The speed of a pneumatic cylinder is set through the air volume, not through the pressure. This compact flow control valve connects the thread R 3/8" to a tube of 12 mm outside diameter and works with exhaust air control (standard). The throttle screw acts in one flow direction only, in the opposite direction the check valve opens fully. The materials are body Nickel-plated brass / PA 66, release ring PA 66, seal NBR, retaining claws stainless steel, cartridge ZnDC zinc-plated. The temperature range runs from -20 to +80 °C.

Advantages

• Materials body Nickel-plated brass / PA 66, release ring PA 66, seal NBR, retaining claws stainless steel, cartridge ZnDC zinc-plated, only silicone-free seals and lubricants are used during assembly.
• Operating pressure of -0.95 bar, which states the permissible range.
• Temperature range of -20 to +80 °C, suitable for production environments with changing load.
• Media Compressed air, neutral gases, the valve needs no separate treatment.
• Version exhaust air control (standard), so the speed is limited on the correct side of the piston.

Applications

• Matching forward and return stroke in cycled handling devices.
• Production environments within the temperature range -20 to +80 °C.
• Speed adjustment on pneumatic cylinders with 12 mm tube.
• Screwing directly into cylinder end caps with thread R 3/8".