Toggle lever valve 2/2-way, panel mounting, M 5, nominal width 2 mm, nickel-plated brass

This manually operated 2/2-way valve switches a compressed air line right at the machine without any electrical power or control signal. The toggle lever stays in the chosen position and shows at a glance whether the line is open or shut off. Inlet and outlet are threaded M 5, and the nominal width of 2 mm gives a flow rate of 185 l/min. The nickel-plated brass body with internal parts of brass and stainless steel and an NBR seal works from -5 to +70 °C. Panel mounting only calls for a Ø 12.5 mm hole in sheet metal up to 4 mm thick.

Advantages

• Manual actuation without auxiliary energy, the toggle lever holds the position it was set to
• 185 l/min flow rate at a nominal width of 2 mm
• Nickel-plated brass body, internal parts of brass and stainless steel, NBR seal
• Use from 0 to 8 bar and from -5 to +70 °C, also suitable for neutral gases
• Panel mounting with an M 12x1 bulkhead thread in a Ø 12.5 mm hole, sheet thickness up to 4 mm
• The lever can be aligned freely during installation, which keeps the switching position easy to read

Technical data

Applications

• Shutting off compressed air lines on operator panels and control boards
• Manual release of blow-off and clamping air on fixtures
• Quick assembly of experimental and test circuits in the laboratory
• Admitting neutral gases in small line cross sections up to 2 mm nominal width
• Maintenance points where a line has to be closed without tools