Electronics and Controls
Valve Amplifier
- Selection criteria
- Frequently asked questions
- Pressure relief valves, proportional
- Pressure reducing valves, proportional
Valve amplifiers from Bosch Rexroth convert the setpoint from the machine control into the solenoid current for proportional valves. They provide ramps, current control and characteristic curve adjustment and thus determine how finely and reproducibly the valve follows the signal.
The designs differ by mounting location: plug-in amplifiers VT-SSPA1 and VT-SSBA1 sit directly on the valve solenoid, modules such as VT-MRPA and VT-MSPA are mounted in the control cabinet, and circuit boards of the VT-SR, VT-VRPA, VT 5041 and VT 11021 series plug into a card holder. Supply voltage is 24 V DC, the setpoint is 0 to 10 V, ±10 mA or a switching signal depending on the type.
- 46 items
- 1 manufacturer
- Net prices plus VAT
Buying guide
How to choose Valve Amplifier
What matters when choosing: properties, comparison and typical applications.
Selection criteria
| Criterion | Options | What to look for |
|---|---|---|
| Design | plug-in, module, circuit board | Plug-in amplifiers save wiring at the valve, modules and boards keep the electronics in the cabinet. |
| Setpoint | 0 to 10 V, ±10 mA, switching signal (PWM) | The setpoint input must match the output of your controller. |
| Valve assignment | general types and valve-specific boards, e.g. VT-SR41 for 2WRC32 | Valve-specific amplifiers are matched to the solenoid and characteristic of one valve. |
| Supply | 24 V DC | Check the solenoid current against the output current of the amplifier. |
Frequently asked questions
- When do I need a valve amplifier?
- Whenever a proportional valve has no integrated electronics. The amplifier supplies the controlled solenoid current, the machine control only provides the setpoint.
- Plug-in amplifier or circuit board?
- The plug-in amplifier is plugged directly onto the valve solenoid and only needs supply and setpoint. Boards and modules sit in the cabinet and offer more settings, for example for ramps and characteristic curves.
- Which setpoint is the right one?
- That depends on the output of your controller. Amplifiers are available with 0 to 10 V voltage input, ±10 mA current input or as switching amplifiers for a digital signal.













