Adjustable T connector, tube 25 S, zinc-plated steel, heavy series

Once installed, the adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. Material zinc-plated steel is listed for this version. The article is listed with a working pressure of 400 bar. Also stated are heavy series.

Benefits

• The branch can point in any direction before it is locked, so tube 25 S (M36x2) can be laid without rework.
• Tube stud 25 S and tube connection 25 S (M36x2) in the same size.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

At tube stud 25 S of a plant in zinc-plated steel this creates a test or measuring point.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.