Adjustable T connector, tube 25 S, stainless steel 1.4571, no nut or ring

In use, the adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. The data also state a temperature range of -60 to +400 °C. The stated figure is a working pressure of 400 bar. In addition the data give heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 25 S (M36x2) can be laid without rework.
• Tube stud 25 S and tube connection 25 S (M36x2) in the same size.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

At tube stud 25 S of a plant in stainless steel 1.4571 this creates a test or measuring point.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.