Adjustable T connector with cone, tube 25 S, stainless steel 1.4571, no nut or ring

In use, the adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. The data also state a temperature range of -20 to +200 °C. The stated figure is a working pressure of 400 bar. In addition the data give heavy series and scope of delivery without nut and cutting ring.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 25 S (M36x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 25 S for a soft joint that can be undone repeatedly.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

When splitting a flow between two consumers the version in stainless steel 1.4571 holds 400 bar on both paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.