Adjustable T connector with cone, tube 14 S, NC clamping ring 1.4571

The adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. The article is made of stainless steel 1.4571. The data give tube stud 14 S and tube connection 14 S (M22x1.5). The version is listed with heavy series and clamping system NC clamping ring.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 14 S (M22x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 14 S for a soft joint that can be undone repeatedly.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

When splitting a flow between two consumers the version in stainless steel 1.4571 holds 400 bar on both paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.