Adjustable T connector with cone, tube 15 L, zinc-plated steel

Once installed, the adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. Material zinc-plated steel is listed for this version. The data sheet gives a working pressure of 315 bar. Also stated are light series.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 15 L (M22x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 15 L for a soft joint that can be undone repeatedly.
• Working pressure up to 315 bar in the light series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.

Applications

For a gauge take-off the tee is set into line 15 L (M22x1,5) while the main line stays continuous.

Standards and conformity

The stated temperature range -35 to +100 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.