Adjustable male stud elbow, G 1/4", tube 8 L, NC clamping ring 1.4571

As a adjustable male stud elbow the article leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. The data state a working pressure of 315 bar. This version is listed with male stud thread G 1/4" and tube connection 8 L (M14x1.5). Material stainless steel 1.4571 is listed for this version. Also stated are light series and clamping system NC clamping ring.

Benefits

• The elbow can be set and is then counter-locked, so tube 8 L (M14x1,5) stays free of stress.
• Parallel male stud thread G 1/4" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 315 bar in the light series.
• Temperature range -20 to +200 °C, limited by the elastomer seal at the body in stainless steel 1.4571.
• Tube connection 8 L (M14x1,5) through a cutting ring, held by both form and friction.

Applications

For maintenance on a line of the light series only the union nut is undone and the stud thread stays in place.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.