Adjustable male stud elbow, G 1/2", tube 16 S, stainless steel 1.4571

Once installed, the adjustable male stud elbow leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. It is supplied with male stud thread G 1/2" and tube connection 16 S (M24x1.5). It is produced from stainless steel 1.4571. In addition the data give heavy series.

Benefits

• The elbow can be set and is then counter-locked, so tube 16 S (M24x1,5) stays free of stress.
• Parallel male stud thread G 1/2" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -20 to +200 °C, limited by the elastomer seal at the body in stainless steel 1.4571.
• Tube connection 16 S (M24x1,5) through a cutting ring, held by both form and friction.

Applications

At a cylinder port with thread G 1/2" the elbow leads tube 16 S (M24x1,5) to the side at once and saves space.

Standards and conformity

The stated temperature range -20 to +200 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.