Adjustable 45° connector, tube 28 L, stainless steel 1.4571, with sealing cone and O-ring

Once installed, the adjustable 45° connector turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. The data state a working pressure of 160 bar. The stated figures are tube stud 28 L and tube connection 28 L (M36x2). Also stated are light series.

Benefits

• The 45 degree turn carries tube 28 L (M36x2) on even where a right angle would need too much room.
• The bend can be set to any direction before it is locked and is counter-locked afterwards.
• Sealing cone with an O-ring at tube stud 28 L for a soft joint that can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Technical data

Applications

In pipework of the light series the bending radius of the tube is left alone because the angle sits in the coupling.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.