Drawn stainless steel tube DIN EN ISO 1127, outside diameter 25 mm, wall 2.5 mm, 1.4301

This stainless steel tube carries media through the plant in a drawn wall without a weld seam. The data sheet gives a working pressure range of -1 to 276 bar. The stated figures are 25 mm outside diameter and 2.5 mm wall thickness.

Benefits

• Drawn without a weld seam to DIN EN ISO 1127, outside diameter 25 mm.
• Wall thickness 2.5 mm for a working pressure of -1 to 276 bar.
• Material 1.4301, heat treated and supplied with a matt or bright annealed surface.
• Every tube is eddy current tested to 100 percent under 80 bar pressure.
• Tolerances to DIN EN ISO 1127 in D4/T3, above 42 mm outside diameter in D3/T3.

Applications

In hydraulic and process lines the tube 25 x 2.5 mm carries the medium at a working pressure of -1 to 276 bar.

Standards and conformity

Outside diameter 25 mm and wall thickness 2.5 mm follow DIN EN ISO 1127 with tolerance D4/T3.