Drawn stainless steel tube DIN EN ISO 1127, outside diameter 20 mm, wall 2.5 mm, 1.4301

The stainless steel tube carries media through the plant in a drawn wall without a weld seam and follows DIN EN ISO 1127. This version comes with 20 mm outside diameter and 2.5 mm wall thickness. It is complemented by a wall thickness of 2.5 mm.

Benefits

• Drawn without a weld seam to DIN EN ISO 1127, outside diameter 20 mm.
• Wall thickness 2.5 mm for a working pressure of -1 to 345 bar.
• Material 1.4301, heat treated and supplied with a matt or bright annealed surface.
• Every tube is eddy current tested to 100 percent under 80 bar pressure.
• Tolerances to DIN EN ISO 1127 in D4/T3, above 42 mm outside diameter in D3/T3.

Applications

In hydraulic and process lines the tube 20 x 2.5 mm carries the medium at a working pressure of -1 to 345 bar.

Standards and conformity

Outside diameter 20 mm and wall thickness 2.5 mm follow DIN EN ISO 1127 with tolerance D4/T3.