Drawn stainless steel tube DIN EN ISO 1127, outside diameter 22 mm, wall 1.5 mm, 1.4571

Made to DIN EN ISO 1127, this stainless steel tube carries media through the plant in a drawn wall without a weld seam. This version is listed with 22 mm outside diameter and 1.5 mm wall thickness. The stated figure is a working pressure range of -1 to 188 bar.

Benefits

• Drawn without a weld seam to DIN EN ISO 1127, outside diameter 22 mm.
• Wall thickness 1.5 mm for a working pressure of -1 to 188 bar.
• Material 1.4571, heat treated and supplied with a matt or bright annealed surface.
• Every tube is eddy current tested to 100 percent under 80 bar pressure.
• Tolerances to DIN EN ISO 1127 in D4/T3, above 42 mm outside diameter in D3/T3.

Applications

In chemical plants, food technology and apparatus engineering 1.4571 is chosen wherever a tube wall without a weld seam is required.

Standards and conformity

Dimensions and tolerances of this size comply with DIN EN ISO 1127.