Drawn stainless steel tube DIN EN ISO 1127, outside diameter 16 mm, wall 3 mm, 1.4571

This stainless steel tube to DIN EN ISO 1127 carries media through the plant in a drawn wall without a weld seam. The data sheet gives a working pressure range of -1 to 518 bar. The stated material is stainless steel 1.4571.

Benefits

• Drawn without a weld seam to DIN EN ISO 1127, outside diameter 16 mm.
• Wall thickness 3 mm for a working pressure of -1 to 518 bar.
• Material 1.4571, heat treated and supplied with a matt or bright annealed surface.
• Every tube is eddy current tested to 100 percent under 80 bar pressure.
• Tolerances to DIN EN ISO 1127 in D4/T3, above 42 mm outside diameter in D3/T3.

Applications

In hydraulic and process lines the tube 16 x 3 mm carries the medium at a working pressure of -1 to 518 bar.

Standards and conformity

Outside diameter 16 mm and wall thickness 3 mm follow DIN EN ISO 1127 with tolerance D4/T3.