Images are examples, some edited with AI. The technical data are authoritative. AI notice
Controller CPX-E-CEC-M1 - Festo 5266781
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Dimensions (W x L x H) | 42.2 mm x 76.5 mm x 125.8 mm |
|---|---|
| Grid dimension | 18.9 mm |
| Type of mounting | via DIN rail |
| Max. number of modules | 10 |
| Product weight | 145 g |
| Mounting position | Vertical, Horizontal |
| Ambient temperature | -5 ... 50 °C |
| Note on ambient temperature | -5 - 60°C for vertical installation |
| Storage temperature | -20 ... 70 °C |
| Relative air humidity | 95%, Non-condensing |
| Degree of protection | IP20 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Protection against direct and indirect contact | PELV |
| LABS (PWIS) conformity | VDMA24364 zone III |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| KC mark | KC-EMV |
| Approval | RCM, c UL us - Listed (Oil) |
| Certificate issuing authority | UL E239998 |
| Note on materials | RoHS compliant |
| Material housing | PA |
| Diagnostics via LED | Force mode, Module status, Network status, engineering port 1, Network status EtherCAT®, Run, Power supply, electronics/sensors, Load power supply, System errors |
| Operator controls | DIP switch for RUN/STOP |
| IP address setting | DHCP, Via CODESYS |
| Fieldbus interface | Ethernet |
| Field bus, protocol | EtherCAT®, EtherCAT CoE, EtherCAT EoE, EtherCAT FoE, EtherCAT master |
| Fieldbus interface, function | Bus connection continuing |
| Field bus, connection type | Socket |
| Field bus, connection system | RJ45 |
| Fieldbus interface, connection pattern | 00995789 |
| Field bus, connection pattern | 8 |
| Field bus interface, electrical isolation | Yes |
| Field bus interface, transmission rate | 100 Mbit/s |
| Ethernet interface, connection type | Socket |
| Ethernet interface, protocol | EasyIP, Modbus TCP, OPC-UA, TCP/IP |
| Ethernet interface, function | Diagnostics |
| Ethernet interface, connection system | RJ45 |
| Ethernet interface, connection pattern | 00995789 |
| Ethernet interface, number of pins/wires | 8 |
| Ethernet interface, transmission rate | 10 Mbit/s, 100 Mbit/s |
| Max. address volume, inputs | 64 byte |
| Max. address volume, outputs | 64 byte |
| System parameters | Diagnostic memory, Fail-safe response, System start |
| Module parameters | Channel alarms for undervoltage, Process value representation of analogue modules |
| Configuration support | CODESYS V3 |
| Additional functions | CODESYS V3 with SoftMotion |
| CPU data | Dual core 650 MHz |
| Power supply, function | Electronic system and sensors |
| Power supply, connection type | Terminal strip |
| Power supply, note on connection type | > 4 A and UL 2x terminal strip for power supply |
| power supply, connection system | Spring-loaded terminal |
| Power supply, connection pattern | 00995847 |
| Power supply, number of pins/wires | 4 |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ±25% |
| Power supply, conductor diameter | 0.2 ... 1.5 mm² |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Max. power supply | 8 A |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 65 mA |
| Power failure bridging | 20 ms |
| Reverse polarity protection | 24 V sensor supply against 0 V sensor supply |
| Programming software | CODESYS provided by Festo |
| Program memory | 12 MB user program |
| Processing time | Approx. 200 µs/1 k instruction |
| Function modules | And others, Read CPX-E module diagnostics, CPX-E diagnostic status, Copy CPX-E diagnostic trace |
| Buffering time real-time clock | 3 Wochen |
| Flag | 120 kB remanent data, CODESYS variable concept |
| Weight | 0.24 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPX-E-CEC-M1 |
| EAN | 4052568422394 |
| Zolltarifnummer | 85371091 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
