Images are examples, some edited with AI. The technical data are authoritative. AI notice
PROFIBUS interface CPX-AP-I-PB-M12 - Festo 8086608
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Dimensions (W x L x H) | 45 mm x 170 mm x 35 mm |
|---|---|
| Type of mounting | On DIN rail via accessories, With through-hole |
| Max. number of modules | 56 |
| Product weight | 186 g |
| Ambient temperature | -20 ... 60 °C |
| Storage temperature | -40 ... 70 °C |
| Relative air humidity | 5 - 95%, Non-condensing |
| Degree of protection | IP65, IP67 |
| Note on degree of protection | Unused connections sealed |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| Max. cable length | 50 m system communication |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Cleanroom suitability, measured according to ISO 14644-14 | Element installed statically, no meaningful evaluation possible according to ISO 14644-1 |
| CE mark (see declaration of conformity) | To EU EMC Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| KC mark | KC-EMV |
| Approval | RCM, c UL us - Listed (Oil) |
| Certificate issuing authority | UL E239998 |
| Note on materials | RoHS compliant |
| Material housing | Makrolon®, Nickel-plated die-cast zinc |
| Material o-ring | Fluoro rubber |
| Diagnostics via LED | Diagnostics per module, Power supply, electronics/sensors, Load power supply, System diagnostics, Maintenance required |
| Diagnostics via bus | Electronics/sensors overvoltage, Load overvoltage, Electronics/sensors undervoltage, Load undervoltage |
| Note on fieldbus interface | Terminating resistor at socket possible |
| Fieldbus interface | PROFIBUS |
| Field bus, protocol | PROFIBUS DP-V1 |
| Fieldbus interface, function | Incoming bus connection |
| Field bus, connection type | Plug |
| Field bus, connection system | M12x1, B-encoded to EN 61076-2-101 |
| Field bus, connection pattern | 5 |
| Field bus interface, electrical isolation | Yes |
| Field bus interface, transmission rate | 500 kbps, 6 Mbit/s, 9.6 kbps, 93.75 kbps |
| Fieldbus interface 2, type | PROFIBUS |
| Fieldbus interface 2, protocol | PROFIBUS DP-V1 |
| Fieldbus interface 2, function | Bus connection continuing |
| Fieldbus interface 2, connection type | Socket |
| Fieldbus interface 2, connection technology | M12x1, B-encoded to EN 61076-2-101 |
| Fieldbus interface 2, number of pins/wires | 5 |
| Fieldbus interface 2, galvanic isolation | Yes |
| Fieldbus interface 2, transmission rate | 1.5 Mbps, 12 Mbit/s, 187.5 kbps, 19.2 kbps, 3 Mbit/s, 500 kbps, 6 Mbit/s, 9.6 kbps, 93.75 kbps |
| Max. address volume, inputs | 244 byte |
| Max. address volume, outputs | 244 byte |
| Configuration support | GSD file |
| Communication interface, function | System communication XF20 OUT / XF21 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | M8x1, D-coded according to EN 61076-2-114 |
| Communication interface, number of pins/cores | 4 |
| Communication interface, protocol | AP |
| Communication interface, screened | Yes |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, connection type | Plug |
| power supply, connection system | M8x1, A-coded to EN 61076-2-104 |
| Power supply, number of pins/wires | 4 |
| Power transmission, function | Outgoing electronics/sensors and load |
| Power transmission, connection type | Socket |
| Power transmission, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power transmission, number of pins/wires | 4 |
| Note regarding operating voltage | SELV/PELV fixed power supplies required, Note the voltage drop |
| Nominal operating voltage DC of load | 24 V |
| Permissible voltage fluctuation of load | ±25% |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ±25% |
| Max. power supply | 2 x 4 A (external fuse required) |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 80 mA |
| Intrinsic current consumption at nominal operating voltage load | Typically 5 mA |
| Power failure bridging | 10 ms |
| Reverse polarity protection | Yes |
| Weight | 0.21 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPX-AP-I-PB-M12 |
| EAN | 4052568550752 |
| Zolltarifnummer | 85176200 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
