Images are examples, some edited with AI. The technical data are authoritative. AI notice
Digital input module CPX-AP-L-16NDI-PI - Festo 8176326
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Protocol | AP |
|---|---|
| Dimensions (W x L x H) | 90 mm x 106 mm x 70 mm |
| Type of mounting | via DIN rail |
| Product weight | 145 g |
| Ambient temperature | -20 ... 50 °C |
| Storage temperature | -40 ... 70 °C |
| Relative air humidity | 5 - 95%, Non-condensing |
| Degree of protection | IP20 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Pollution degree | 2 |
| Overvoltage category | II |
| Max. cable length | 30 m inputs, 50 m system communication |
| Note on max. cable length | Power supply according to nominal voltage |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Cleanroom suitability, measured according to ISO 14644-14 | Element installed statically, no meaningful evaluation possible according to ISO 14644-1 |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| KC mark | KC-EMV |
| Approval | RCM |
| Note on materials | RoHS compliant, Free of halogen |
| Material housing | PA66, PVC |
| Diagnostics via LED | Diagnostics per module, Status per channel |
| Diagnostics per internal communication | Short circuit/overload in sensor supply, Electronics/sensors overvoltage, Electronics/sensors undervoltage |
| Max. address volume, inputs | 2 byte |
| Communication interface, function | System communication XF10 IN / XF20 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | RJ45 |
| Communication interface, plug pattern | 00995789 |
| Communication interface, number of pins/cores | 8 |
| Communication interface, protocol | AP |
| Communication interface, screened | Yes |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, connection type | Socket |
| power supply, connection system | Push-pull according to IEC 61984 |
| Power supply, connection pattern | 00997625 |
| Power supply, number of pins/wires | 4 |
| Power transmission, function | Outgoing electronics/sensors and load |
| Power transmission, connection type | Socket |
| Power transmission, connection technology | Push-pull according to IEC 61984 |
| Power transmission, plug pattern | 00997625 |
| Power transmission, number of pins/wires | 4 |
| Note regarding operating voltage | SELV/PELV fixed power supplies required, Note the voltage drop |
| Nominal operating voltage DC | 24 V |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ±25% |
| Max. power supply | 2 x 4 A (external fuse required) |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 32 mA |
| Power failure bridging | 10 ms |
| Reverse polarity protection | Yes |
| Electrical connection input, function | Digital input |
| Electrical connection input, connection type | 6x socket |
| Electrical connection input, connector system | Push-pull according to IEC 61984 |
| Electrical connection input, connection pattern | 00997626 |
| Electrical connection input, number of connections/cores | 8 |
| Number of inputs | 16 |
| Characteristic for inputs | To IEC 61131-2, type 3 |
| Switching level | Signal 0: (PS – 5 V) to PS, Signal 1: 0 V to (PS – 11 V) |
| Switching logic for inputs | NPN (negative switching), 2-wire sensors to IEC 61131-2, 3-wire sensors to IEC 61131-2 |
| Input debounce time | 0.1 ms, 3 ms (standard), 10 ms, 20 ms |
| Fuse protection of inputs (short circuit) | Glass cartridge fuse |
| Max. residual current of inputs per module | 4 A |
| Electrical isolation of inputs between channels | No |
| Electrical isolation of inputs between channel – internal communication | No |
| Weight | 0.24 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPX-AP-L-16NDI-PI |
| EAN | 4052568772604 |
| Zolltarifnummer | 85389099 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
