Images are examples, some edited with AI. The technical data are authoritative. AI notice
Digital input/output module CPX-AP-A-12DI4DO-M12-5P - Festo 8129111
Net
excl. VAT
€154.56
Item
FES-8129111
Manufacturer no.
CPX-AP-A-12DI4DO-M12-5P
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Dimensions (W x L x H) | 50.1 mm x 107.3 mm x 57.5 mm |
|---|---|
| Grid dimension | 50.1 mm |
| Type of mounting | Screw-clamped |
| Product weight | 98 g |
| Mounting position | Any |
| Ambient temperature | -20 ... 50 °C |
| Note on ambient temperature | Observe ambient temperature derating according to IEC 61131-2:2017 |
| Storage temperature | -20 ... 70 °C |
| Relative air humidity | 5 - 95%, Non-condensing |
| Nominal altitude of use | <= 2000 m ASL (> 79.5 kPa) |
| Max. installation height | 3500 m |
| Note on max. installation height | Observe ambient temperature derating according to IEC 61131-2:2017 |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Note on vibration resistance | Transport application test with severity class 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Note on shock resistance | 30 g/11 ms to EN 60068-2-27, SG1 on DIN rail, SG2 on direct mounting, Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Protection class | III |
| Pollution degree | 2 |
| Overvoltage category | II |
| Max. cable length | 30 m outputs, 30 m inputs |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Fire test material | UL94 V-0 (housing) |
| Note on materials | RoHS compliant, Free of halogen, Free of phosphoric acid ester |
| Material cover | Reinforced PBT |
| Material screws | Nickel-plated steel |
| Material o-ring | Fluoro rubber |
| Diagnostics via LED | (Outputs) Diagnostics per channel, Power supply load (outputs), (Inputs-Outputs) Diagnostics per module, (Inputs-Outputs) Status per channel |
| Diagnostics per internal communication | Communication error, Short-circuit/overload in output signal, Short circuit/overload in sensor supply, Electronics/sensors overvoltage, Load overvoltage, Electronics/sensors undervoltage, Load undervoltage |
| Max. address volume, inputs | 2 byte |
| Max. address volume, outputs | 1 byte |
| Number of outputs | 4 |
| Module parameters | Configuration of voltage monitoring load supply PL, Behaviour after short circuit/overload at the output |
| Channel parameters | Input debounce time |
| Communication interface, protocol | AP |
| Note regarding operating voltage | SELV/PELV fixed power supplies required, Note the voltage drop |
| Note on nominal operating voltage DC | Protected Extra-Low-Voltage to IEC 60204-1 |
| Nominal operating voltage DC of load | 24 V |
| Permissible voltage fluctuation of load | ±25% |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ±25% |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 40 mA |
| Intrinsic current consumption at nominal operating voltage load | Typically 5 mA |
| Power failure bridging | 10 ms |
| Potential separation between the supply voltages electronics/sensor technology and load/valves | Yes |
| Reverse polarity protection | Yes |
| Electrical connection input, function | Digital input |
| Electrical connection input, connection type | 6x socket |
| Electrical connection input, connector system | M12x1, A-coded to EN 61076-2-101 |
| Electrical connection input, number of connections/cores | 5 |
| Electrical connection input, connection pattern | 00995384 |
| Number of inputs | 12 |
| Characteristic for inputs | To IEC 61131-2, type 3 |
| Switching level | Signal 0: <= 5 V, Signal 1: ≥ 11 V |
| Switching logic for inputs | PNP (positive switching), 2-wire sensors to IEC 61131-2, 3-wire sensors to IEC 61131-2 |
| Input debounce time | 0.1 ms, 3 ms (standard), 10 ms, 20 ms |
| Electrical isolation of inputs between channel – internal communication | Yes |
| Behaviour after end of overload of the sensor supply | Automatic return |
| Fuse protection of inputs (short circuit) | Internal electronic fuse per module |
| Max. residual current of inputs per module | 1.8 A |
| Electrical isolation of inputs between channels | No |
| Electrical connection output, function | Digital output |
| Electrical connection output, connection type | 2x socket |
| Electrical connection output, connector system | M12x1, A-coded to EN 61076-2-101 |
| Electrical connection output, number of connections/cores | 5 |
| Electrical connection output, connection pattern | 00995384 |
| Characteristic for outputs | To IEC 61131-2, type 0.5 |
| Switching logic for outputs | PNP (positive switching) |
| Fuse protection of outputs (short circuit) | Internal electronic fuse per channel |
| Behaviour after end of overload of the outputs | No automatic return |
| Output delay with ohmic load | Signal change 0->1: < 200 µs, Signal change 1->0: < 200 µs |
| Max. residual current outputs per module | 2 A |
| Electrical isolation of outputs between channels | No |
| Electrical isolation of outputs between channel - internal communication | Yes |
| Max. power supply per channel | 0.5 A |
| Weight | 0.11 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPX-AP-A-12DI4DO-M12-5P |
| EAN | 4052568599492 |
| Zolltarifnummer | 85389099 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
