Solenoid coil type S, 12 V DC, 2.8 W, 8.1 mm armature bore, connector size 0 - E.MC

When the coil on a solenoid valve fails, only the coil is replaced and the valve stays in the line. This type S coil belongs to 3/2, 5/2 and 5/3-way solenoid valves and runs on 12 V DC, power 2.8 W. The type letter in the valve data is what decides the choice.

Advantages

• 100 % duty cycle at 12 V DC, power 2.8 W.
• Armature bore 8.1 mm bottom, 7.3 mm top, 22 mm between armature bores.
• Outer dimensions 17 x 24 x 26 mm, weight 37 g.
• Connector size 0, supplied with connector or cable.

Applications

• Replacing a faulty or burnt-out coil on 3/2, 5/2 and 5/3-way solenoid valves.
• Spare parts stock for systems with several valves using type S coils.
• Changing a type S valve to another control voltage, provided the valve is offered in that voltage.

Matching valves

Type S coils are available for 12 V DC, 24 V DC, 24 V AC and 230 V AC. They are intended as spare parts for valves whose data sheet specifies coil type S. No warranty is given for use on other valves.