Festo
Quarter-turn actuator, single-acting, spring return, flange F07/F10, ATEX DAPS-0120-090-RS1-F0710 - Festo 533443
Item FES-533443
€585.32
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, single-acting, spring return, size 0120, flange F07/F10 DAPS-0120-090-RS1-F0710-MW - Festo 8005034
Spring-return quarter turn actuator in size 0120 for quarter-turn valves, mounted via flange F07/F10 to ISO 5211. The spring set returns with 30 to 60 Nm, nominal operating pressure 5.6 bar. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 2. Weight 9 kg.
Net
excl. VAT
€1,060.77
Item
FES-8005034
Manufacturer no.
DAPS-0120-090-RS1-F0710-MW
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
If the compressed air fails, the spring set of the DAPS-0120-090-RS1-F0710-MW turns the valve into the defined position with 30 to 60 Nm spring return torque. Mounting is via flange F07/F10 (ISO 5211) and shaft connection T22, depth 24.8 mm.
Benefits
- Spring return torque 30 to 60 Nm
- Safety position by spring force if air supply fails, operating pressure 2.8 to 8.4 bar
- Valve interface to ISO 5211: flange F07/F10, shaft connection T22
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- Corrosion resistance class CRC 2
Applications
Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F07/F10. ATEX category II 2G/2D permits use of the DAPS-0120 in zones 1 and 2 as well as zones 21 and 22. Medium: compressed air to ISO 8573-1:2010 [7:4:4], permitted 2.8 to 8.4 bar, rated at 5.6 bar. For sizing the valve bracket: product weight 9 kg.
Technical data
| Order code | DAPS-0120-090-RS1-F0710-MW |
|---|---|
| Festo part number | 8005034 |
| Size of valve actuator | 0120 |
| Flange hole pattern | F07, F10 |
| Swivel angle | 92° |
| Shaft connection depth | 24.8 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | single-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 2.8 to 8.4 bar |
| Nominal operating pressure | 5.6 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -50 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Ambient temperature | -20 to 80 °C |
| Air consumption at 6 bar per cycle 0°-90°-0° | 5.6 l |
| Product weight | 9000 g |
| Shaft connection | T22 |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FKM, NBR, PUR |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| Note on end-position adjustment | one end position adjustable as required |
| Supply pressure for spring set | 2.8 bar |
| Spring return torque at 0° swivel angle | 40 Nm |
| Spring return torque at 50° swivel angle | 30 Nm |
| Spring return torque at 90° swivel angle | 60 Nm |
| Spring set | 1 |
| Weight | 9 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0120-090-RS1-F0710-MW |
| EAN | 4052568256838 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Seal material | FKM, NBR, PUR |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperaturbereich | -20-80 °C |
| Temperature (max.) | 80 |
Downloads
Accessories
Festo
Quarter turn actuator, single-acting, spring return, size 0120, flange F05/F07 DAPS-0120-090-RS1-F0507-CR - Festo 552887
Item FES-552887
€1,662.59
Festo
Quarter turn actuator, single-acting, spring return, size 0120, flange F07/F10 DAPS-0120-090-RS2-F0710-MW - Festo 8005035
Item FES-8005035
€1,060.77
Festo
Quarter turn actuator, single-acting, spring return, size 0120, flange F07/F10 DAPS-0120-090-RS3-F0710-MW - Festo 8005036
Item FES-8005036
€1,060.77
Festo
Quarter turn actuator, single-acting, spring return, size 0120, flange F10/F07 DAPS-0120-090-RS4-F0710-MW - Festo 8005037
Item FES-8005037
€1,012.78
Festo
Quarter turn actuator, single-acting, spring return, size 0120, flange F07/F10 DAPS-0120-090-RS4-F0710-T4 - Festo 8030619
Item FES-8030619
€604.52
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.