Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, single-acting, spring return, size 0120, flange F07/F10 DAPS-0120-090-RS3-F0710-MW - Festo 8005036
Spring-return quarter turn actuator in size 0120 for quarter-turn valves, mounted via flange F07/F10 to ISO 5211. At 5.6 bar nominal pressure the air stroke delivers 75 to 140 Nm, the spring returns with 45 to 90 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 2.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
For on/off valves with a safety position: the DAPS-0120-090-RS3-F0710-MW is single-acting with spring return and reaches up to 140 Nm at 5.6 bar. It mounts via the F07/F10 hole pattern to ISO 5211, the T22 shaft, depth 24.8 mm engages the valve stem.
Benefits
- Air torque 75 to 140 Nm at 5.6 bar, spring return torque 45 to 90 Nm
- Safety position by spring force if air supply fails, operating pressure 4.2 to 8.4 bar
- Valve interface to ISO 5211: flange F07/F10, shaft connection T22
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- Corrosion resistance class CRC 2
Applications
Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F07/F10. For hazardous areas: the actuator with flange F07/F10 is rated ATEX II 2G/2D for zones 1 and 2 as well as zones 21 and 22. The operating medium is compressed air to ISO 8573-1:2010 [7:4:4] within 4.2 to 8.4 bar, nominal pressure 5.6 bar. The product weight is 9 kg.
Technical data
| Order code | DAPS-0120-090-RS3-F0710-MW |
|---|---|
| Festo part number | 8005036 |
| Size of valve actuator | 0120 |
| Flange hole pattern | F07, F10 |
| Swivel angle | 92° |
| Shaft connection depth | 24.8 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | single-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 4.2 to 8.4 bar |
| Nominal operating pressure | 5.6 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -50 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Ambient temperature | -20 to 80 °C |
| Torque at nominal operating pressure and 0° swivel angle | 140 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 75 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 110 Nm |
| Air consumption at 6 bar per cycle 0°-90°-0° | 5.6 l |
| Product weight | 9000 g |
| Shaft connection | T22 |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FKM, NBR, PUR |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| Note on end-position adjustment | one end position adjustable as required |
| Supply pressure for spring set | 4.2 bar |
| Spring return torque at 0° swivel angle | 60 Nm |
| Spring return torque at 50° swivel angle | 45 Nm |
| Spring return torque at 90° swivel angle | 90 Nm |
| Spring set | 3 |
| Weight | 10 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0120-090-RS3-F0710-MW |
| EAN | 4052568256852 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Seal material | FKM, NBR, PUR |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperaturbereich | -20-80 °C |
| Temperature (max.) | 80 |
Downloads
Accessories
Quarter-turn actuator, single-acting, spring return, flange F07/F10, ATEX DAPS-0120-090-RS3-F0710 - Festo 533445
Item FES-533445
Quarter turn actuator, single-acting, spring return, size 0120, flange F05/F07 DAPS-0120-090-RS3-F0507-CR - Festo 552889
Item FES-552889
Quarter turn actuator, single-acting, spring return, size 0120, flange F07/F10 DAPS-0120-090-RS2-F0710-MW - Festo 8005035
Item FES-8005035Quarter turn actuator, single-acting, spring return, size 0120, flange F10/F07 DAPS-0120-090-RS4-F0710-MW - Festo 8005037
Item FES-8005037Quarter turn actuator, single-acting, spring return, size 0120, flange F07/F10 DAPS-0120-090-RS1-F0710-MW - Festo 8005034
Item FES-8005034Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.