Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, single-acting, spring return, size 0120, flange F07/F10 DAPS-0120-090-RS4-F0710-T4 - Festo 8030619
Spring-return quarter turn actuator in size 0120 for quarter-turn valves, mounted via flange F07/F10 to ISO 5211. The spring holds at least 60 Nm, with compressed air at nominal operating pressure 60 to 120 Nm are available. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 3.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
For on/off valves with a safety position: the DAPS-0120-090-RS4-F0710-T4 is single-acting with spring return and reaches up to 120 Nm at nominal operating pressure. Flange pattern F07/F10 to ISO 5211 and shaft connection T22, depth 24.8 mm fit directly onto the valve top.
Benefits
- 60 to 120 Nm with compressed air at nominal operating pressure and 60 to 120 Nm from the spring set
- Safety position by spring force if air supply fails, operating pressure 5.6 to 8.4 bar
- Valve interface to ISO 5211: flange F07/F10, shaft connection T22
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand
Applications
It operates 90-degree valves with top flange F07/F10, for example ball valves or butterfly valves in pipelines. The ATEX rating II 2G/2D allows the DAPS-0120-090-RS4-F0710-T4 to be installed in zones 1 and 2 as well as zones 21 and 22. The operating medium is compressed air to ISO 8573-1:2010 [7:4:4] within 5.6 to 8.4 bar, nominal operating pressure. The product weight is 6.8 kg.
Technical data
| Order code | DAPS-0120-090-RS4-F0710-T4 |
|---|---|
| Festo part number | 8030619 |
| Size of valve actuator | 0120 |
| Flange hole pattern | F07, F10 |
| Swivel angle | 90° |
| End-position adjustment range at 0° | -1 to 9° |
| Shaft connection depth | 24.8 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | single-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 5.6 to 8.4 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -20 to 150 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 3 - high corrosion stress |
| Ambient temperature | -20 to 150 °C |
| Torque at nominal operating pressure and 0° swivel angle | 120 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 60 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 80 Nm |
| Note on torque | The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling |
| Air consumption at 6 bar per cycle 0°-90°-0° | 5.6 l |
| Product weight | 6800 g |
| Shaft connection | T22 |
| Pneumatic connection | G1/8 |
| Note on materials | contains paint-wetting impairment substances (PWIS), RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FKM, PTFE-reinforced |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| End-position adjustment range at 90° | 81 to 91° |
| Note on end-position adjustment | one end position adjustable as required |
| Supply pressure for spring set | 5.6 bar |
| Spring return torque at 0° swivel angle | 80 Nm |
| Spring return torque at 50° swivel angle | 60 Nm |
| Spring return torque at 90° swivel angle | 120 Nm |
| Spring set | 4 |
| Weight | 7 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0120-090-RS4-F0710-T4 |
| EAN | 4052568280796 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Seal material | FKM, PTFE-reinforced |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperaturbereich | -20-150 °C |
| Temperature (max.) | 150 |
Downloads
Accessories
Quarter turn actuator, single-acting, spring return, size 0120, flange F10/F07 DAPS-0120-090-RS4-F0710-MW - Festo 8005037
Item FES-8005037Quarter-turn actuator, single-acting, spring return, flange F07/F10, ATEX DAPS-0120-090-RS4-F0710 - Festo 533446
Item FES-533446
Quarter turn actuator, single-acting, spring return, size 0120, flange F05/F07 DAPS-0120-090-RS4-F0507-CR - Festo 552890
Item FES-552890Quarter turn actuator, single-acting, spring return, size 0120, flange F07/F10 DAPS-0120-090-RS3-F0710-MW - Festo 8005036
Item FES-8005036Quarter turn actuator, single-acting, spring return, size 0120, flange F07/F10 DAPS-0120-090-RS2-F0710-MW - Festo 8005035
Item FES-8005035Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.