Images are examples, some edited with AI. The technical data are authoritative. AI notice
Counter module CPX-E series 4 inputs IP20 CPX-E-1CI - Festo 4827505
Festo counter module CPX-E-1CI at a glance: 4 inputs, degree of protection IP20, grid dimension 18.9 mm. As part of the CPX-E series, the module extends the periphery of a controller with additional channels.
Available
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The CPX-E-1CI belongs to the Festo CPX-E series. As part of the CPX-E series, the module extends the periphery of a controller with additional channels.
Benefits
- 4 inputs
- Degree of protection IP20
- Grid dimension 18.9 mm
- Ambient temperature -5 to 50 °C
- Dimensions 18.9 mm x 76.6 mm x 124.3 mm
- Mounting via DIN rail
Applications
Used in automation solutions based on the Festo CPX-E series. Ambient temperature -5 to 50 °C, protection IP20.
Technical data
| Feature | Value |
|---|---|
| Type | CPX-E-1CI |
| Festo part number | 4827505 |
| Dimensions (W x L x H) | 18.9 mm x 76.6 mm x 124.3 mm |
| Grid dimension | 18.9 mm |
| Diagnostics via LED | error per module, status per channel, encoder supply error, encoder error, encoder normal operation, encoder supply normal operation |
| Diagnostics via bus | short circuit/overload sensor supply, parameter error, measuring system error, wire break monitoring, zero pulse monitoring, track error monitoring |
| Module parameters | internal revision ID, debounce time digital inputs, pulses/zero pulse, integration time speed measurement, load value, latch event, latch signal, latch behaviour, upper count limit, signal type/encoder type, signal evaluation, line break monitoring, zero pulse monitoring, track error monitoring, lower count limit |
| Channel parameters | signal extension |
| Fuse protection (short circuit) | Internal electronic fuse per module |
| Isolation channel - internal bus | No |
| Isolation channel - channel | No |
| Power supply, connection type | Terminal strip |
| Power supply, connection system | Spring-loaded terminal |
| Power supply, number of pins/wires | 6 |
| Power supply, conductor diameter | 0.2 to 1.5 mm² |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Approval | RCM |
| CE mark (see declaration of conformity) | to EU EMC Directive |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 95%, Non-condensing |
| Degree of protection | IP20 |
| Ambient temperature | -5 to 50 °C |
| Note on ambient temperature | -5 - 60 °C for vertical installation |
| Max address volume outputs | 2 Byte |
| Type of mounting | via DIN rail |
| Note on materials | contains paint-wetting impairment substances (LABS), RoHS compliant |
| Material housing | PA |
| Number of inputs | 4 |
| Input debounce time | 0.02 ms, 0.1 ms, 3 ms |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | typical 15 mA |
| Maximum residual current of inputs per module | 1.8 A |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Switching level | Signal 0: ≤ 5 V, Signal 1: ≥ 11 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Max address volume inputs | 12 Byte |
| Characteristic for inputs | To IEC 61131-2, type 3 |
| Switching logic for inputs | PNP (positive switching), 2-wire sensors to IEC 61131-2, 3-wire sensors to IEC 61131-2 |
| Electrical connection input, function | Digital input |
| Electrical connection input, connection type | 2x terminal strip |
| Electrical connection input, connector system | Spring-loaded terminal |
| Electrical connection input, number of connections/cores | 6 |
| Electrical connection for input, conductor cross section | 0.2 to 1.5 mm² |
| Electrical connection for input, note on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Power failure bridging | 10 ms |
| Electrical connection input 2, function | counter input |
| Electrical connection input 2, connection type | Terminal strip |
| Electrical connection input 2, connection technology | Spring-loaded terminal |
| Electrical connection input 2, number of pins/wires | 6 |
| Electrical connection input 2, pin allocation | 00995848 |
| Electrical connection input 2, conductor cross-section | 0.2 to 1.5 mm² |
| Electrical connection input 2, note on conductor cross-section | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Power supply, function | encoder supply |
| Weight (price list) | 0.105 kg |
| Weight | 0.105 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPX-E-1CI |
| EAN | 4052568418960 |
| Zolltarifnummer | 85389099 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| Norm | DIN EN 61131-2 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6 |
| Series | CPX |
| Protection rating | IP20 |
| Temperature (max.) | 50 |
Downloads
Accessories
Controller CPX-E series EtherNet/IP IP20 CPX-E-CEC-M1-EP - Festo 4252744
Item FES-4252744Controller CPX-E series PROFINET IO IP20 CPX-E-CEC-M1-PN - Festo 4252743
Item FES-4252743Controller CPX-E series EtherNet/IP IP20 CPX-E-CEC-C1-EP - Festo 4252742
Item FES-4252742Controller CPX-E series PROFINET IO IP20 CPX-E-CEC-C1-PN - Festo 4252741
Item FES-4252741Bus module CPX-E series IP20 control technology CPX-E-EP - Festo 4080499
Item FES-4080499Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.



