Images are examples, some edited with AI. The technical data are authoritative. AI notice
Controller CPX-E series PROFINET IO IP20 CPX-E-CEC-M1-PN - Festo 4252743
Festo controller CPX-E-CEC-M1-PN at a glance: fieldbus PROFINET IO, fieldbus interface Ethernet, CPU 512 MB RAM, dual core 766 MHz. Programming is done with CODESYS provided by Festo, so sequence, motion and communication of the machine can be controlled centrally.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Programming is done with CODESYS provided by Festo, so sequence, motion and communication of the machine can be controlled centrally. Type CPX-E-CEC-M1-PN, part number 4252743.
Benefits
- Fieldbus PROFINET IO
- Fieldbus interface Ethernet
- CPU 512 MB RAM, dual core 766 MHz
- Programming with CODESYS provided by Festo
- Degree of protection IP20
- Grid dimension 18.9 mm
Applications
Used in automation solutions based on the Festo CPX-E series. Ambient temperature -5 to 50 °C, protection IP20.
Technical data
| Feature | Value |
|---|---|
| Type | CPX-E-CEC-M1-PN |
| Festo part number | 4252743 |
| Dimensions (W x L x H) | 75.9 mm x 124.3 mm x 82.5 mm |
| Grid dimension | 18.9 mm |
| Diagnostics via LED | run, force mode, network error, network status engineering port 1, network status engineering port 2, network status EtherCAT, network status port 1, network status port 2, power supply electronics/sensors, power supply load, system error, maintenance required |
| Module parameters | bundling of channel alarms, undervoltage diagnostics, channel alarms undervoltage, process value representation analogue modules |
| Power supply, connection type | Terminal strip |
| Power supply, connection system | Spring-loaded terminal |
| Power supply, number of pins/wires | 4 |
| Power supply, conductor diameter | 0.2 to 1.5 mm² |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Approval | RCM Mark, c UL us - Listed (OL) |
| CE mark (see declaration of conformity) | to EU EMC Directive |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 95%, Non-condensing |
| Protection against direct and indirect contact | protective extra-low voltage (PELV) |
| Degree of protection | IP20 |
| Ambient temperature | -5 to 50 °C |
| Note on ambient temperature | -5 - 60 °C for vertical installation |
| Max address volume outputs | 64 Byte |
| Type of mounting | via DIN rail |
| Note on materials | contains paint-wetting impairment substances (LABS), RoHS compliant |
| Material housing | PA |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | typical 150 mA |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Max address volume inputs | 64 Byte |
| Power failure bridging | 20 ms |
| Configuration support | CODESYS V3, GSDML file, operator unit CDSB |
| Maximum number of modules | 10 |
| System parameters | Diagnostic memory, Fail-safe response, System start |
| Operator controls | DIP switch for RUN/STOP, optional: operator unit CDSB |
| Maximum power supply | 8 A |
| Power supply, function | Electronic system and sensors |
| Fieldbus interface, galvanic isolation | Yes |
| Field bus interface, transmission rate | 100 Mbit/s |
| Fieldbus interface | Ethernet |
| Field bus, connection type | 2x socket |
| Field bus, connection system | RJ45 |
| Field bus, connection pattern | 8 |
| Field bus, protocol | PROFINET IO |
| Fieldbus interface, max address volume inputs | 512 Byte |
| Fieldbus interface, max address volume outputs | 512 Byte |
| CPU data | 512 MB RAM, dual core 766 MHz |
| Additional functions | CODESYS V3 with SoftMotion |
| Storage medium | micro SD ≤ 32 GB, USB stick ≤ 32 GB |
| Processing time | approx 200 µs/1 k instruction |
| IP address setting | DHCP, via CoDeSys, optional: via operator unit CDSB |
| Function modules | And others, CPX-E diagnostic status, Copy CPX-E diagnostic trace, Read CPX-E module diagnostics |
| Flag | CoDeSys variable concept, 120 kB retentive data |
| Programming software | CODESYS provided by Festo |
| Program memory | 12 MB user program |
| USB-interface | USB 2.0 |
| Ethernet interface, connection type | 2x socket |
| Ethernet interface, connection system | RJ45 |
| Ethernet interface, number of pins/wires | 8 |
| Ethernet interface, transmission rate | 10 Mbit/s, 100 Mbit/s |
| Ethernet interface, function | switch, diagnostics |
| Ethernet interface, protocol | EasyIP, Modbus TCP, TCP/IP |
| Weight (price list) | 0.39 kg |
| Weight | 0.39 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPX-E-CEC-M1-PN |
| EAN | 4052568291556 |
| Zolltarifnummer | 85371091 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| Operating conditions | EN 60068-2-27, EN 60068-2-6 |
| Series | CPX |
| Protection rating | IP20 |
| Temperature (max.) | 50 |
Downloads
Accessories
Controller CPX-E series EtherNet/IP IP20 CPX-E-CEC-C1-EP - Festo 4252742
Item FES-4252742Controller CPX-E series PROFINET IO IP20 CPX-E-CEC-C1-PN - Festo 4252741
Item FES-4252741Bus module CPX-E series IP20 control technology CPX-E-EP - Festo 4080499
Item FES-4080499Bus module CPX-E series IP20 control technology CPX-E-PN - Festo 4080497
Item FES-4080497Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.




