Images are examples, some edited with AI. The technical data are authoritative. AI notice

Controller CPX-E series PROFINET IO IP20 CPX-E-CEC-C1-PN - Festo 4252741

Festo ✓ Original product Brand new

Festo controller CPX-E-CEC-C1-PN at a glance: fieldbus PROFINET IO, fieldbus interface Ethernet, CPU 512 MB RAM, dual core 766 MHz. Programming is done with CODESYS provided by Festo, so sequence, motion and communication of the machine can be controlled centrally.

Net
€1,303.70
excl. VAT
Item FES-4252741
Manufacturer no. CPX-E-CEC-C1-PN
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The CPX-E-CEC-C1-PN belongs to the Festo CPX-E series. Programming is done with CODESYS provided by Festo, so sequence, motion and communication of the machine can be controlled centrally.

Benefits

  • Fieldbus PROFINET IO
  • Fieldbus interface Ethernet
  • CPU 512 MB RAM, dual core 766 MHz
  • Programming with CODESYS provided by Festo
  • Degree of protection IP20
  • Grid dimension 18.9 mm

Applications

Used in automation solutions based on the Festo CPX-E series. Ambient temperature -5 to 50 °C, protection IP20.

Technical data

FeatureValue
TypeCPX-E-CEC-C1-PN
Festo part number4252741
Dimensions (W x L x H)75.9 mm x 124.3 mm x 82.5 mm
Grid dimension18.9 mm
Diagnostics via LEDforce mode, run, network error, network status engineering port 1, network status engineering port 2, network status EtherCAT, network status port 1, network status port 2, power supply electronics/sensors, power supply load, system error, maintenance required
Module parametersbundling of channel alarms, undervoltage diagnostics, channel alarms undervoltage, process value representation analogue modules
Power supply, connection typeTerminal strip
Power supply, connection systemSpring-loaded terminal
Power supply, number of pins/wires4
Power supply, conductor diameter0.2 to 1.5 mm²
Power supply, note on conductor diameter0.2 - 2.5 mm² for flexible conductors without wire ferrule
ApprovalRCM Mark, c UL us - Listed (OL)
CE mark (see declaration of conformity)to EU EMC Directive
Vibration resistanceTransport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 1 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - no corrosion stress
Storage temperature-20 to 70 °C
Relative air humidity95%, Non-condensing
Protection against direct and indirect contactprotective extra-low voltage (PELV)
Degree of protectionIP20
Ambient temperature-5 to 50 °C
Note on ambient temperature-5 - 60 °C for vertical installation
Max address volume outputs64 Byte
Type of mountingvia DIN rail
Note on materialscontains paint-wetting impairment substances (LABS), RoHS compliant
Material housingPA
Intrinsic current consumption at nominal operating voltage for electronics/sensorstypical 150 mA
Nominal DC operating voltage, electronics/sensors24 V
Permissible voltage fluctuations for electronics/sensors± 25 %
Max address volume inputs64 Byte
Power failure bridging20 ms
Configuration supportCODESYS V3, GSDML file, operator unit CDSB
Maximum number of modules10
System parametersDiagnostic memory, Fail-safe response, System start
Operator controlsDIP switch for RUN/STOP, optional: operator unit CDSB
Maximum power supply8 A
Power supply, functionElectronic system and sensors
Fieldbus interface, galvanic isolationYes
Field bus interface, transmission rate100 Mbit/s
Fieldbus interfaceEthernet
Field bus, connection type2x socket
Field bus, connection systemRJ45
Field bus, connection pattern8
Field bus, protocolPROFINET IO
Fieldbus interface, max address volume inputs512 Byte
Fieldbus interface, max address volume outputs512 Byte
CPU data512 MB RAM, dual core 766 MHz
Additional functionsCODESYS V3
Storage mediummicro SD ≤ 32 GB, USB stick ≤ 32 GB
Processing timeapprox 200 µs/1 k instruction
IP address settingDHCP, via CoDeSys, optional: via operator unit CDSB
Function modulesAnd others, CPX-E diagnostic status, Copy CPX-E diagnostic trace, Read CPX-E module diagnostics
FlagCoDeSys variable concept, 120 kB retentive data
Programming softwareCODESYS provided by Festo
Program memory12 MB user program
USB-interfaceUSB 2.0
Ethernet interface, connection type2x socket
Ethernet interface, connection systemRJ45
Ethernet interface, number of pins/wires8
Ethernet interface, transmission rate10 Mbit/s, 100 Mbit/s
Ethernet interface, functionswitch, diagnostics
Ethernet interface, protocolEasyIP, Modbus TCP, TCP/IP
Weight (price list)0.39 kg
Weight0.39 kg
ManufacturerFesto
Hersteller-NrCPX-E-CEC-C1-PN
EAN4052568291549
Zolltarifnummer85371091
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialPolyamide (PA)
Operating conditionsEN 60068-2-27, EN 60068-2-6
SeriesCPX
Protection ratingIP20
Temperature (max.)50

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.