Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 3/2-way normally open monostable M7 CPE10-M1CH-3OLS-M7 - Festo 550236
The CPE10-M1CH-3OLS-M7 delivers 400 l/min standard nominal flow within 10 mm width as a 3/2-way valve, normally open. M7 supply port, operating pressure -0.9 to 10 bar with external pilot air. 24 V DC coil, M8x1 plug, 4-pin, IP65 and IP67. Manual override: non-detenting, detenting with accessory.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The CPE10-M1CH-3OLS-M7 solenoid valve from the Festo CPE10 series switches up to 400 l/min standard nominal flow at a width of only 10 mm, valve function 3/2-way, normally open. The normally open function keeps a single-acting cylinder pressurised without a signal, for example for clamping or holding tasks.
Benefits
- 4 mm nominal size and 400 l/min within 10 mm width, suited to densely packed valve rows.
- External pilot air at 2.5 to 8 bar: the working pressure can then be -0.9 to 10 bar, including vacuum.
- Quick cycling: 14 ms switch-on and 14 ms switch-off time.
- 24 V DC coil with 1.28 W, 100 % duty cycle, M8x1 plug, 4-pin, IP65 and IP67 with plug socket.
- Port assignment 1, 2 and 3 in M7, pilot ports M3.
- The CPE10-M1CH-3OLS-M7 is tested to EN 60068-2-6 and EN 60068-2-27 and meets CRC 2.
Application and mounting
The CPE10-M1CH-3OLS-M7 is connected via the M7 threaded ports and fastened through its through-holes in any mounting position. The CPE10-M1CH-3OLS-M7 runs on compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation is possible but must then be maintained.
Technical data
| Type | CPE10-M1CH-3OLS-M7 |
|---|---|
| Festo part number | 550236 |
| Valve function | 3/2-way, normally open, monostable |
| Type of actuation | electrical |
| Width | 10 mm |
| Standard nominal flow rate | 400 l/min |
| Operating pressure | -0.9 to 10 bar |
| Design | piston spool |
| Type of reset | pneumatic spring |
| Marine classification | see certificate |
| Degree of protection | IP65, IP67 with plug socket to IEC 60529 |
| Nominal size | 4 mm |
| Sealing principle | soft |
| Mounting position | any |
| Manual override | non-detenting, detenting with accessory |
| Type of piloting | piloted |
| Pilot air supply | external |
| Flow direction | non-reversible |
| Valve position identification | label holder |
| Overlap | positive overlap |
| Switching time off | 14 ms |
| Switching time on | 14 ms |
| Duty cycle | 100 % |
| Maximum positive test pulse with 0 signal | 1200 µs |
| Maximum negative test pulse with 1 signal | 900 µs |
| Coil characteristics | 24 V DC, 1.28 W |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for all further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Medium temperature | -5 to 50 °C |
| Ambient temperature | -5 to 50 °C |
| Product weight | 40 g |
| Electrical connection | M8x1, 4-pin |
| Type of mounting | with through-hole |
| Pilot exhaust air port 82 | M3 |
| Pilot air port 12 | M3 |
| Pneumatic connection, port 1 | M7 |
| Pneumatic connection, port 2 | M7 |
| Pneumatic connection, port 3 | M7 |
| Note on materials | RoHS compliant |
| Seal material | NBR |
| Housing material | die-cast aluminium |
| Pilot pressure | 2.5 to 8 bar |
| Pilot medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Maximum tightening torque, plug | 0.4 Nm |
| Weight | 0.045 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPE10-M1CH-3OLS-M7 |
| EAN | 4052568192198 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | M7 |
| Nominal size DN [mm] | 4 |
| Medium | Compressed air |
| Function | 3/2 open monostable |
| Flow rate [l/min] | 400 |
| Actuation type | Electrical |
| Certification | IEC 60529 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | CPE10 |
| Betriebsdruck max [bar] | 10 |
| Pneumatic connection | M7 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 3/2-way normally closed monostable M7 CPE10-M1CH-3GLS-M7 - Festo 550234
Item FES-550234Solenoid valve 3/2-way normally closed monostable M7 CPE10-M1CH-3GL-M7 - Festo 550233
Item FES-550233Solenoid valve 5/3-way mid-position pressurised M7 CPE10-M1CH-5/3BS-M7 - Festo 550232
Item FES-550232Solenoid valve 5/3-way mid-position pressurised M7 CPE10-M1CH-5/3B-M7 - Festo 550231
Item FES-550231Solenoid valve 5/3-way mid-position exhausted M7 CPE10-M1CH-5/3ES-M7 - Festo 550230
Item FES-550230Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

