Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/3-way mid-position exhausted M7 CPE10-M1CH-5/3ES-M7 - Festo 550230
The CPE10-M1CH-5/3ES-M7 delivers 250 l/min standard nominal flow within 10 mm width as a 5/3-way valve, mid-position exhausted. External pilot air (3 to 8 bar) allows -0.9 to 10 bar operating pressure, including vacuum. Electrical: 24 V DC with 1.28 W, M8x1 plug, 4-pin.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The CPE10-M1CH-5/3ES-M7 solenoid valve from the Festo CPE10 series switches up to 250 l/min standard nominal flow at a width of only 10 mm, valve function 5/3-way, mid-position exhausted. The exhausted mid-position leaves the actuator force-free when the signal drops, for example for set-up work or emergency stop concepts.
Benefits
- 250 l/min standard nominal flow at just 10 mm width and 4 mm nominal size.
- The CPE10-M1CH-5/3ES-M7 works with external pilot air (3 to 8 bar) across an operating range of -0.9 to 10 bar, including vacuum.
- The CPE10-M1CH-5/3ES-M7 switches on in 16 ms and off in 20 ms.
- The 24 V DC coil of the CPE10-M1CH-5/3ES-M7 draws 1.28 W, 100 % duty cycle, connection M8x1 plug, 4-pin.
- IP65 and IP67 degree of protection with plug socket to IEC 60529.
- Pneumatic ports 1, 2, 3, 4 and 5 in M7, pilot air M3.
Application and mounting
The CPE10-M1CH-5/3ES-M7 is connected via the M7 threaded ports and fastened through its through-holes in any mounting position. The CPE10-M1CH-5/3ES-M7 runs on compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation is possible but must then be maintained.
Technical data
| Type | CPE10-M1CH-5/3ES-M7 |
|---|---|
| Festo part number | 550230 |
| Valve function | 5/3-way, mid-position exhausted |
| Type of actuation | electrical |
| Width | 10 mm |
| Standard nominal flow rate | 250 l/min |
| Operating pressure | -0.9 to 10 bar |
| Design | piston spool |
| Type of reset | mechanical spring |
| Marine classification | see certificate |
| Degree of protection | IP65, IP67 with plug socket to IEC 60529 |
| Nominal size | 4 mm |
| Sealing principle | soft |
| Mounting position | any |
| Manual override | non-detenting, detenting with accessory |
| Type of piloting | piloted |
| Pilot air supply | external |
| Flow direction | reversible |
| Valve position identification | label holder |
| Overlap | positive overlap |
| Switching time off | 20 ms |
| Switching time on | 16 ms |
| Duty cycle | 100 % |
| Maximum positive test pulse with 0 signal | 1200 µs |
| Maximum negative test pulse with 1 signal | 900 µs |
| Coil characteristics | 24 V DC, 1.28 W |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for all further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Medium temperature | -5 to 50 °C |
| Ambient temperature | -5 to 50 °C |
| Product weight | 68 g |
| Electrical connection | M8x1, 4-pin |
| Type of mounting | with through-hole |
| Pilot exhaust air port 82 | M3 |
| Pilot air port 12 | M3 |
| Pneumatic connection, port 1 | M7 |
| Pneumatic connection, port 2 | M7 |
| Pneumatic connection, port 3 | M7 |
| Note on materials | RoHS compliant |
| Seal material | NBR |
| Housing material | die-cast aluminium |
| Exhaust function | can be throttled |
| Pilot exhaust air port 84 | M3 |
| Pilot air port 14 | M3 |
| Pneumatic connection, port 4 | M7 |
| Pneumatic connection, port 5 | M7 |
| Pilot pressure | 3 to 8 bar |
| Pilot medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Maximum tightening torque, plug | 0.4 Nm |
| Weight | 0.08 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPE10-M1CH-5/3ES-M7 |
| EAN | 4052568192136 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | M7 |
| Nominal size DN [mm] | 4 |
| Medium | Compressed air |
| Function | 5/3 exhausted |
| Flow rate [l/min] | 250 |
| Actuation type | Electrical |
| Certification | IEC 60529 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | CPE10 |
| Betriebsdruck max [bar] | 10 |
| Pneumatic connection | M7 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 5/3-way mid-position pressurised M7 CPE10-M1CH-5/3B-M7 - Festo 550231
Item FES-550231Solenoid valve 5/3-way mid-position pressurised M7 CPE10-M1CH-5/3BS-M7 - Festo 550232
Item FES-550232Solenoid valve 5/3-way mid-position closed M7 CPE10-M1CH-5/3GS-M7 - Festo 550228
Item FES-550228Solenoid valve 5/3-way mid-position closed M7 CPE10-M1CH-5/3G-M7 - Festo 550227
Item FES-550227Alternatives
Solenoid valve 3/2-way normally closed monostable QS-6 CPE10-M1BH-3GL-QS-6 - Festo 196847
Item FES-196847Solenoid valve 5/2-way bistable QS-6 CPE10-M1BH-5J-QS-6 - Festo 196877
Item FES-196877Solenoid valve 3/2-way normally closed monostable M7 CPE10-M1BH-3GL-M7 - Festo 196915
Item FES-196915Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





