Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 3/2-way normally open monostable M7 CPE10-M1CH-3OL-M7 - Festo 550235
Slim 3/2-way solenoid valve delivering 400 l/min at just 10 mm width, normally open. Internal pilot air, operating pressure 2.5 to 8 bar. 24 V DC coil, M8x1 plug, 4-pin, IP65 and IP67. Festo type CPE10-M1CH-3OL-M7. Manual override: non-detenting, detenting with accessory.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
With 400 l/min standard nominal flow at 10 mm width, the CPE10-M1CH-3OL-M7 solenoid valve puts a lot of air capacity into a narrow valve row. The valve function is 3/2-way, normally open. In the normal position port 2 is pressurised, the signal shuts off the supply and exhausts the consumer.
Benefits
- 400 l/min standard nominal flow at just 10 mm width and 4 mm nominal size.
- Internal piloting from port 1 (M7), operating pressure 2.5 to 8 bar.
- Quick cycling: 14 ms switch-on and 14 ms switch-off time.
- Electrically connected via M8x1 plug, 4-pin to 24 V DC, power consumption 1.28 W, IP65 and IP67 with plug socket.
- Pneumatic ports 1, 2 and 3 in M7, pilot air M3.
- Tested to EN 60068-2-6 and EN 60068-2-27, CRC 2 and usable at -5 to 50 °C ambient temperature.
Application and mounting
The CPE10-M1CH-3OL-M7 is connected via the M7 threaded ports and fastened through its through-holes in any mounting position. The CPE10-M1CH-3OL-M7 runs on compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation is possible but must then be maintained.
Technical data
| Type | CPE10-M1CH-3OL-M7 |
|---|---|
| Festo part number | 550235 |
| Valve function | 3/2-way, normally open, monostable |
| Type of actuation | electrical |
| Width | 10 mm |
| Standard nominal flow rate | 400 l/min |
| Operating pressure | 2.5 to 8 bar |
| Design | piston spool |
| Type of reset | pneumatic spring |
| Marine classification | see certificate |
| Degree of protection | IP65, IP67 with plug socket to IEC 60529 |
| Nominal size | 4 mm |
| Sealing principle | soft |
| Mounting position | any |
| Manual override | non-detenting, detenting with accessory |
| Type of piloting | piloted |
| Pilot air supply | internal |
| Flow direction | non-reversible |
| Valve position identification | label holder |
| Overlap | positive overlap |
| Switching time off | 14 ms |
| Switching time on | 14 ms |
| Duty cycle | 100 % |
| Maximum positive test pulse with 0 signal | 1200 µs |
| Maximum negative test pulse with 1 signal | 900 µs |
| Coil characteristics | 24 V DC, 1.28 W |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for all further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Medium temperature | -5 to 50 °C |
| Ambient temperature | -5 to 50 °C |
| Product weight | 40 g |
| Electrical connection | M8x1, 4-pin |
| Type of mounting | with through-hole |
| Pilot exhaust air port 82 | M3 |
| Pilot air port 12 | M3 |
| Pneumatic connection, port 1 | M7 |
| Pneumatic connection, port 2 | M7 |
| Pneumatic connection, port 3 | M7 |
| Note on materials | RoHS compliant |
| Seal material | NBR |
| Housing material | die-cast aluminium |
| Maximum tightening torque, plug | 0.4 Nm |
| Weight | 0.048 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPE10-M1CH-3OL-M7 |
| EAN | 4052568192181 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | M7 |
| Nominal size DN [mm] | 4 |
| Medium | Compressed air |
| Function | 3/2 open monostable |
| Flow rate [l/min] | 400 |
| Actuation type | Electrical |
| Certification | IEC 60529 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | CPE10 |
| Betriebsdruck max [bar] | 8 |
| Pneumatic connection | M7 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 3/2-way normally closed monostable M7 CPE10-M1CH-3GLS-M7 - Festo 550234
Item FES-550234Solenoid valve 3/2-way normally closed monostable M7 CPE10-M1CH-3GL-M7 - Festo 550233
Item FES-550233Solenoid valve 5/3-way mid-position pressurised M7 CPE10-M1CH-5/3BS-M7 - Festo 550232
Item FES-550232Solenoid valve 5/3-way mid-position pressurised M7 CPE10-M1CH-5/3B-M7 - Festo 550231
Item FES-550231Solenoid valve 5/3-way mid-position exhausted M7 CPE10-M1CH-5/3ES-M7 - Festo 550230
Item FES-550230Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

