5/3-way solenoid valve, pilot-operated, exhaust centre, G 1/4, 600 l/min, 230 V AC - E.MC

When an actuator has to stop in a defined way rather than just extend and retract, it needs a third switching position. The pilot-operated valve from the E.MC RV series switches with two 230 V AC coils and passes up to 600 l/min at its G 1/4 port. With neither coil energised, the spool sits in the centre position. Both working ports are then open to exhaust. The actuator is depressurised and can be pushed by hand.

Advantages

• Flow rate of 600 l/min at 3.9 mm nominal diameter and 12 mm² effective area (Cv 0.67), enough air for brisk strokes without the valve throttling them.
• IP65 protection to DIN 40050 and insulation class F, each coil draws 4 VA.
• Valve body and spool in aluminium alloy, HNBR O-rings, pilot unit in engineering plastic.
• Operating pressure of 1.5 to 8 bar with a 12 bar test pressure, and the air does not need to be lubricated.

Applications

• Medium-size cylinders in fixtures and feeders, piped in G 1/4.
• Setting up and adjusting fixtures where the cylinder has to be moved by hand at rest.
• Simple controls that run directly on 230 V AC without a power supply.

Accessories and spare parts

A matching 230 V AC replacement coil, type T1, is available separately. For wiring with plug-in connectors, E.MC lists connection cables in 0.3, 0.6 and 1 m lengths.