5/3-way solenoid valve, exhaust centre, G 1/2, 2500 l/min, 24 V AC - YPC SF6403

In its centre position this 5/3-way valve connects both working ports to exhaust. The cylinder loses its pressure and can be moved by hand, while the supply port stays blocked. Energising either solenoid gives 2500 l/min through the G 1/2 ports. The 24 V AC coil runs from the control transformer in the cabinet.

Advantages

• Exhaust centre takes the force off the actuator without shutting down the supply.
• Response time 35 ms max. at 5 bar, switching frequency up to 3 Hz.
• No lubricator needed: designed for non-lubricated air, use ISO VG32 if the air is oiled.
• 22 mm class F solenoid coil with 3-pin DIN connector, IP65, detachable from the valve.

Applications

• Double-acting cylinders that have to be relieved before the next stroke.
• Set-up mode where cylinders or slides are moved by hand.
• Shutdown concepts where an actuator must lose its pressure on a power failure.

Accessories and spare parts

A matching replacement solenoid coil for 24 V AC is available separately and can be changed without opening the pneumatic circuit. Several valves can be grouped on SF6000 series manifolds with 2 to 10 stations, sharing a common G 1/2 supply and exhaust.

According to YPC the SF6000 series carries the CE mark and complies with RoHS.