5/2-way solenoid valve, double solenoid, G 3/8, 2000 l/min, 24 V DC - YPC SF5200

If a cylinder must stay where it is on a power loss instead of returning, an impulse valve is the answer. The YPC SF5200 holds the last switched position mechanically, so the coils only need a short pulse. Flow is 2000 l/min. The 24 V DC coil draws 2.1 W and runs straight from a PLC output.

Advantages

• Impulse operation: the switched position is held without power, switching time 25 ms max at 5 bar.
• Spool and body in aluminium, NBR seals, pilot section in glass fibre reinforced polyamide.
• 22 mm solenoid coil, insulation class F, with 3-pin DIN connector rated IP65.
• Up to 5 Hz switching frequency with a voltage tolerance of -10 to +10 %.

Applications

• Actuators that must keep their position on power loss, such as flaps and gates.
• Direct control from 24 V DC digital outputs of a PLC.
• Cycled operation with short switching pulses instead of a permanently energised coil.

Accessories and spare parts

The replacement solenoid coil for 24 V DC is available separately and can be changed without opening the pneumatic circuit. For banks of several valves YPC offers the MF5500 manifold with 2 to 12 stations and a common supply through G 3/8.