5/2-way solenoid valve, double pilot 115 V AC, G 3/8", 2000 l/min, aluminium

With G 3/8" ports and a flow rate of 2000 l/min, this 5/2-way solenoid valve serves cylinders for which smaller sizes cannot supply enough air. The pulse function uses two coils for 115 V AC drawing 4.1 VA, so a brief control command is enough to change state. At 5 bar the spool inside the aluminium body changes position in less than 30 ms. Operating pressure ranges from 1.5 to 10 bar with filtered compressed air, lubricated or not. Solenoid coil and connector are included in the delivery.

Benefits

• 2000 l/min flow through G 3/8" ports for cylinders of larger bore
• Pulse operation at 115 V AC with a power consumption of only 4.1 VA
• Change of state in less than 30 ms at 5 bar operating pressure
• Aluminium body with NBR seals and a pilot section of glass fibre reinforced polyamide
• IP 65 protection and a voltage tolerance of ± 10 %
• Solenoid coil design M with connector size 1 is supplied complete

Applications

• Large double-acting cylinders with an air demand around 2000 l/min
• Presses and clamping units that should hold their position without holding current
• Installations running a 115 V AC control level
• Main air circuits where G 3/8" ports keep the pressure drop low

Standards and conformity

The version is documented with degree of protection IP 65, so the housing is dust tight and protected against water jets. No other approvals are stated.