Elbow flow control valve with check function, exhaust air control, G 1/4", tube 10 mm, -0.95 bar

The speed of a pneumatic cylinder is set through the air volume, not through the pressure. This elbow flow control valve with check function connects the thread G 1/4" to a tube of 10 mm outside diameter and works with exhaust air control. The throttle screw acts in one flow direction only, in the opposite direction the check valve opens fully. The materials are body Nickel-plated brass / PA 66, release ring PA 66, seal NBR, retaining claws stainless steel, cartridge ZnDC zinc-plated. The temperature range runs from -20 to +80 °C.

Advantages

• Media Compressed air, neutral gases, the valve needs no separate treatment.
• Version exhaust air control, so the speed is limited on the correct side of the piston.
• Push-in connector for tube with 10 mm outside diameter, release works without tools through the release ring.
• Connection thread G 1/4" for screwing directly into the cylinder end cap.
• Materials body Nickel-plated brass / PA 66, release ring PA 66, seal NBR, retaining claws stainless steel, cartridge ZnDC zinc-plated, only silicone-free seals and lubricants are used during assembly.

Applications

• Speed adjustment on pneumatic cylinders with 10 mm tube.
• Screwing directly into cylinder end caps with thread G 1/4".
• Avoiding the stick-slip effect on slow running actuators.
• Matching forward and return stroke in cycled handling devices.