5/2-way solenoid valve, single solenoid, spring return, G 3/8, 2000 l/min, 230 V AC - YPC SF5101

Where an actuator has to return to a defined position as soon as the signal is gone, the single solenoid YPC SF5101 is the obvious choice. One coil switches, the spring resets. Its 2000 l/min flow suits cylinders that a smaller valve would noticeably throttle. The 230 V AC coil draws 4.1 VA and is supplied straight from the mains, so no power supply unit is needed in the cabinet.

Advantages

• Defined home position thanks to air and spring return, switching time 25 ms max at 5 bar.
• Spool and body in aluminium, NBR seals, pilot section in glass fibre reinforced polyamide.
• 22 mm solenoid coil, insulation class F, with 3-pin DIN connector rated IP65.
• Up to 5 Hz switching frequency with a voltage tolerance of -10 to +10 %.
• 32 mm valve width keeps valve banks narrow as well.

Applications

• Simple controls switching directly at 230 V AC mains voltage.
• Lifting doors, diverters and ejectors with a clear rest position.
• Clamping and feed cylinders that must return home when the signal fails.
• Valve banks on the MF5500 manifold with a common supply.

Accessories and spare parts

The replacement solenoid coil for 230 V AC is available separately and can be changed without opening the pneumatic circuit. For banks of several valves YPC offers the MF5500 manifold with 2 to 12 stations and a common supply through G 3/8.