3/2-way solenoid valve, normally closed, G 1/8, 75 l/min, 115 V AC, direct acting - YPC YSV311

Passing 75 l/min through G 1/8, the YSV311 handles jobs where M5 valves run short, such as medium single-acting cylinders. With the coil de-energised, port A is exhausted, so the actuator goes pressureless if power fails. The 115 V AC coil fits machines with a 115 V control circuit, as built for North American sites.

Advantages

• Stackable, seal and screw are included, as is a blanking screw for single use
• Aluminium body with NBR seals, runs oil-free
• Non-locking manual override for testing without power
• 75 l/min through G 1/8, enough for medium single-acting cylinders
• Direct acting from 0 bar, no minimum pressure, operating pressure up to 8 bar

Applications

• machines wired for a 115 V control voltage
• medium single-acting cylinders with G 1/8 ports
• piloting process valves and rotary actuators
• blow-off and sealing air duties with low air demand

Accessories and spare parts

A replacement solenoid coil, type M, for 115 V AC is available separately should a coil ever need replacing.