5/2-way solenoid valve, double solenoid, bistable, G 1/8, 620 l/min, 12 V DC - YPC

The valve moves 620 l/min through its G 1/8 ports and works from 1.5 to 10 bar. With two coils, this bistable 5/2-way valve remembers the last position it was switched to. If the control voltage fails, the cylinder stays where it is instead of moving back on its own. Drawing 2.1 W per coil at 12 V DC, the valve suits equipment on a 12 V supply, such as mobile or battery-powered units.

Advantages

• Holds position without power, the coil only draws 2.1 W for the switching pulse.
• 620 l/min flow through G 1/8 ports, exhaust G 1/8.
• For lubricated and non-lubricated filtered air from -10 to +60 °C.
• Switching time below 25 ms at 5 bar for short cycle times.
• Aluminium body and spool, NBR seals.

Applications

• Diverters and locks whose position must be retained.
• Clamping fixtures that must stay clamped on power failure.
• Cycled operation from pulse outputs without keeping a coil energised.

Accessories and spare parts

A matching 12 V DC replacement coil is available separately, the valve carries two of them.