5/2-way solenoid valve, pulse valve, G 1/4", 980 l/min, 24 V AC, aluminium

Double-acting cylinders need a valve that pressurises both chambers alternately, and that is precisely the job of this 5/2-way solenoid valve in its pulse version. After a short control pulse the position reached is retained, so no holding power is consumed and the position stays defined even if the supply voltage fails. Up to 980 l/min pass through the three G 1/4" ports, while the two exhaust ports use G 1/8". Operating pressure ranges from 1,5 to 10 bar and the switching time at 5 bar stays below 25 ms. The valve is supplied together with solenoid coil and connector.

Benefits

• Pulse function without continuous current, power consumption of only 4,1 VA
• Flow rate of 980 l/min at an operating pressure of 1,5 to 10 bar
• Switching time below 25 ms measured at 5 bar
• Body and spool in aluminium, seals in NBR
• Pilot stage made of glass fibre reinforced polyamide
• IP 65 protection and a voltage tolerance of ± 10 %

Technical data

Applications

• Driving double-acting pneumatic cylinders on assembly fixtures
• Applications where the position must be retained during a power failure
• Cycling machinery with a high air demand of up to 980 l/min
• Control of rotary actuators and grippers in special purpose machinery
• Damp or dusty surroundings thanks to IP 65 protection

Standards and conformity

The electrical version reaches degree of protection IP 65 according to the IP code classification for enclosures. The permitted control voltage tolerance is ± 10 % referred to 24 V AC.