5/2-way solenoid valve, double solenoid, bistable, G 1/4, 980 l/min, 115 V AC - YPC SF4200

With two coils, this bistable 5/2-way valve remembers the last position it was switched to. If the control voltage fails, the cylinder stays where it is instead of moving back on its own. With a 115 V AC coil (4.1 VA per coil), the valve runs on the control voltage common in machines built for 115 V mains. This pilot-operated spool valve from the SF4000 series moves 980 l/min through its G 1/4 ports.

Advantages

• Holds position without power, the coil only draws 4.1 VA for the switching pulse.
• Switching time max. 25 ms at 5 bar, up to 5 Hz switching frequency.
• Runs on non-lubricated air, use ISO VG32 oil if lubricated.
• IP65 with DIN connector, coil insulation class F.
• 980 l/min flow on a 26 mm wide body, easy to mount side by side.

Applications

• Cycled operation from pulse outputs without keeping a coil energised.
• Diverters and locks whose position must be retained.
• Clamping fixtures that must stay clamped on power failure.

Accessories and spare parts

A matching 115 V AC replacement coil is available separately, the valve carries two of them. For manifold mounting, YPC offers the MF4500 manifold base in the SF4000 series with 2 to 14 stations and common supply and exhaust ports.