Valve terminal 1 Series, 4x 5/2-way single solenoid, M7 side-ported, DeviceNet - E.MC

This terminal puts 4 valves straight onto a DeviceNet network, with no output cards and no multipole cable to the cabinet. The bus node sits on the terminal, the 8 M7 outlets are on the side of the sub-base.

Advantages

• Straight onto DeviceNet: bus connection M12 plug and M12 socket, 5-pin, A-coded, power via M12, no output card needed in the controller.
• Swap valves without touching the tubing: the M7 outlets are in the sub-base, the valves are changed from above.
• Narrow build: 11.5 mm pitch per valve station, response time 15 ms or less at 5 bar.
• Reconfigurable: any station can later take a valve with one or two coils, including 5/3-way or 2x 3/2-way functions.
• Long service life: at least 40 million cycles, aluminium body and spool, NBR seals.

Applications

• Decentralised valve terminals right at the machine, integrated into an existing DeviceNet network
• Installations with frequent valve changes, where the tubing should stay connected during a swap
• Pick-and-place and handling units with small-bore cylinders, short-stroke cylinders and grippers on 4 to 6 mm tubing

Accessories

E.MC supplies M12 power cables, matching bus cables and blanking plates for unused stations.