5/2-way solenoid valve, spring return 12 V DC, G 1/4", 980 l/min, aluminium body

This 5/2-way solenoid valve with spring return is a good fit wherever a clearly defined home position is required. As soon as the 12 V DC control voltage is missing, the spring pushes the spool back and the cylinder travels to its initial position. A power consumption of 2.1 W allows direct connection to small power supplies or a 12 volt on-board system. Up to 980 l/min pass through the G 1/4" working threads while exhaust air leaves through two G 1/8" ports. Inside the aluminium body the spool works at 1.5 to 10 bar and switches in less than 25 ms at 5 bar.

Benefits

• Defined home position through spring return without additional pilot air
• Only 2.1 W drawn at 12 V DC, suitable for small power supply units
• 980 l/min flow through G 1/4" working ports and G 1/8" exhaust ports
• Shortest switching time in the range at less than 25 ms at 5 bar
• Aluminium body, NBR seals and degree of protection IP 65
• Voltage tolerance of ± 10 % for fluctuating direct current supply

Applications

• Mobile machines and trailers running on 12 volt direct current
• Safety related movements that must return to the home position if the signal fails
• Cycling handling equipment with switching times below 25 ms
• Cylinder control with an air demand of up to 980 l/min

Standards and conformity

Degree of protection IP 65 is stated for the valve, so it is dust tight and protected against water jets. No further conformity data is available.