5/2-way solenoid valve, double solenoid (bistable), G 1/2, 3500 l/min, 24 V AC - YPC SF6200

Two solenoids, two stable positions. A short pulse shifts this 5/2-way valve and it stays there after the voltage drops, so a double-acting cylinder keeps the last commanded position. Flow at the G 1/2 ports is 3500 l/min. The 24 V AC coil runs from the control transformer in the cabinet.

Advantages

• Holds its switching position on power loss, a short pulse is enough to change over.
• Body and spool in aluminium, NBR seals, pilot section in glass-fibre reinforced polyamide.
• 3500 l/min at 5 bar and an effective area of 65.0 mm², with G 1/2 on every port.
• Response time 25 ms max. at 5 bar, switching frequency up to 5 Hz.

Applications

• High-volume double-acting cylinders that hold their end position without a holding signal.
• Diverters, flaps and gates in conveyors that must not change over on a power failure.
• Pulse-controlled cycling where no coil stays energised permanently.

Accessories and spare parts

A matching replacement solenoid coil for 24 V AC is available separately and can be changed without opening the pneumatic circuit. Several valves can be grouped on SF6000 series manifolds with 2 to 10 stations, sharing a common G 1/2 supply and exhaust.

According to YPC the SF6000 series carries the CE mark and complies with RoHS.