Wherever compressed air has to be redirected quickly and repeatably, this 3/2-way valve sits between the service unit and the actuator. The connection G 1/4" provides 700 l/min. The operating pressure is stated as 0 to 8 bar. The materials are body aluminium, spool POM, seals NBR.
Advantages
- Connection G 1/4" and exhaust G 1/4", so the piping follows the existing line network.
- Media oiled and non-oiled, filtered compressed air, so no separate treatment is needed.
- Actuation by Mushroom head button, which fixes the direction of response.
- Pressure inlet possible at any port, which simplifies the piping.
- Flow rate of 700 l/min, so the connected actuator moves without the valve throttling it.
Technical data
| Feature | Value |
|---|
| Actuation | Mushroom head button |
|---|
| Thread (2x) | G 1/4" |
|---|
| Exhaust thread (1x) | G 1/4" |
|---|
| Colour | red |
|---|
| Material body | aluminium |
|---|
| Material spool | POM |
|---|
| Material seals | NBR |
|---|
| Temperature range | -10 to +60 °C |
|---|
| Operating pressure | 0 to 8 bar |
|---|
| Flow rate | 700 l/min |
|---|
| Media | oiled and non-oiled, filtered compressed air |
|---|
| Pressure inlet | possible at any port |
|---|
| Panel cut-out | 30.5 mm |
|---|
Applications
- Replacement of a defective valve of the same type in existing machines.
- Control of double-acting cylinders with an air demand up to 700 l/min.
- Sequencing of pneumatic axes with connection G 1/4" in handling equipment.
- Control of pneumatic flaps, gates and diverters in conveying equipment.