5/2-way limit valve, Roller lever, G 1/4", 700 l/min, -0.95 to 12 bar, exhaust 2x G 1/4"

An end position can be sensed purely mechanically where no electrical signal is available. This 5/2-way limit valve releases a pilot pressure when actuated and passes 700 l/min at connection G 1/4". Actuation is by Roller lever. The actuating force is 40 N. The materials are body and spool 1.4436, seal FKM.

Advantages

• Connection G 1/4" and exhaust 2x G 1/4", so the piping follows the existing line network.
• Media oiled and non-oiled compressed air, non-toxic gases (50 µm), so no separate treatment is needed.
• Actuation by Roller lever, which fixes the direction of response.
• Actuating force of 40 N, so a light ramp is enough to trip the valve.
• Pressure inlet possible at any port. Panel mounting (not for actuation with roller lever): two nuts for panel mounting are included in the scope of delivery (hole diameter: 24 mm, max. panel thickness: 5 mm), which simplifies the piping.

Applications

• Replacement of a defective valve of the same type in existing machines.
• Control of double-acting cylinders with an air demand up to 700 l/min.
• Sequencing of pneumatic axes with connection G 1/4" in handling equipment.
• Control of pneumatic flaps, gates and diverters in conveying equipment.