3/2-way solenoid valve, de-energised closed (NC), G 1/4", 24 V AC, 0 to 7 bar, exhaust G 1/8" (male)

This 3/2-way solenoid valve switches the air path electrically and needs no manual action at the machine. The connection is G 1/4" and control is by 24 V AC. The switching function is de-energised closed (NC). The operating pressure is stated as 0 to 7 bar. The materials are body brass (DN 25 & DN 40: gunmetal), internal parts brass / stainless steel, seal NBR (types G 1/8" & G 1/4": FKM).

Advantages

• Connection G 1/4" and exhaust G 1/8" (male), so the piping follows the existing line network.
• Control voltage tolerance plus/minus 10 percent, which makes short supply dips uncritical.
• Media Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request, so no separate treatment is needed.
• Kv value of 3.4 l/min, from which the flow rate for the actual pressure drop can be calculated.
• Mounting position any (G 1/8" & G 1/4": upright solenoid), which has to be observed before installation.

Applications

• Installation in control cabinets with a supply of 24 V AC.
• Control of pneumatic flaps, gates and diverters in conveying equipment.
• Cycled feeding and clamping units in fixture building.
• Plants operated within the temperature range -10 to +130 °C.