Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Ready assembled to 1.3 m and therefore installable without crimping tools. Type EN 853 2 SN carries DN 25 at 165 bar and connects with M 36x2.
Hydraulic hose assembly EN 853 2 SN, DN 25, M 36x2, pipe connection 28 L, DKO / CEL, 1.3 m, 165 bar
FLUIDICS EQUIPMENT
Original product
Net price (excl. VAT)
€156.63
Item
FL-308963
Manufacturer no.
2SN25-28L-1300-IA
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.2SN25-28L-1300-IA
EAN4050571191641
Customs tariff number40092200
ConditionNew
Artikel
FL-308963
Frequently Bought Together
-
This Item:
€156.63
-
Compressed air hose assembly EN 853 1 SN, DN 19, M 30x2, pipe connection 22 L, DKO / CEL, 2 m
€115.45
-
Hydraulic hose assembly EN 853 2 SN, DN 8, M 16x1.5, pipe connection 10 L, DKO / CEL, 1.5 m
€48.82
Total price
Type 2 SN to EN 853 joins two connection points over 1.3 m at DN 25 and 165 bar working pressure. Thread M 36x2 and pipe connection 28 L define the mating point. The reinforcement consists of two steel wire braids. The two ends carry different connection forms, so the assembly links two different mating points.
Benefits
- working pressure 165 bar at nominal size DN 25
- reinforcement of two steel wire braids to EN 853 2 SN
- temperature range -40 to +100 °C (briefly +120 °C)
- cut to 1.3 m and crimped at both ends, no assembly work of your own is needed
- cover resistant to ozone and weathering
- connecting thread M 36x2 for the pipe connection 28 L, DKO / CEL
Technical data
| hose type | EN 853 2 SN |
|---|---|
| version | standard |
| nominal size DN [mm] | 25 |
| working pressure [bar] | 165 |
| length [m] | 1.3 |
| end connections | DKO / CEL |
| pipe connection | 28 L |
| thread d/D | M 36x2 |
| inner tube | synthetic rubber |
| cover | synthetic rubber, resistant to ozone and weathering |
| reinforcement | two steel wire braids |
| temperature range | -40 to +100 °C (briefly +120 °C) |
| media | hydraulic oils on a mineral oil basis, vacuum (max. -0.83 bar), water, lubricants and fuels |
| field of use | high pressure hydraulic systems |
Applications
Its place is on hydraulic power units in plant engineering, where the line runs between pump, valve block and cylinder. According to the data sheet hydraulic oils on a mineral oil basis, vacuum (max. -0.83 bar), water, lubricants and fuels are approved.
Standards and conformity
The hose is built to EN 853 as type 2 SN and reinforced with two steel wire braids.
| Manufacturer | Fluidics equipment |
|---|---|
| Hersteller-Nr | 2SN25-28L-1300-IA |
| EAN | 4050571191641 |
| Zolltarifnummer | 40092200 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | Standard |
| Length [mm] | 1300 |
| Norm | DIN EN 853 |
Customers Who Bought This Item Also Bought
