Hydraulic hose assembly EN 853 2 SN, DN 8, M 16x1.5, pipe connection 10 L, DKO / DKO, 1.2 m

Type 2 SN to EN 853 joins two connection points over 1.2 m at DN 8 and 315 bar working pressure. Thread M 16x1.5 and pipe connection 10 L define the mating point. The reinforcement consists of two steel wire braids. Both ends carry the same connection form, so the assembly can be fitted either way round.

Benefits

• working pressure 315 bar at nominal size DN 8
• reinforcement of two steel wire braids to EN 853 2 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 1.2 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 16x1.5 for the pipe connection 10 L, DKO / DKO

Applications

It is used on machine tools and presses, where the power unit and the consumer are joined over a pre-assembled length. According to the data sheet hydraulic oils on a mineral oil basis, vacuum (max. -0.83 bar), water, lubricants and fuels are approved.

Standards and conformity

The hose is built to EN 853 as type 2 SN and reinforced with two steel wire braids.