Hydraulic hose assembly EN 853 2 SN, DN 19, M 30x2, pipe connection 22 L, DKO / DKO, 2.4 m

This version of type 2 SN to EN 853 is already cut to 2.4 m and crimped at both ends, so no assembly work is left to do. It carries DN 19 at 215 bar and connects through thread M 30x2 to the pipe connection 22 L. The build uses two steel wire braids. Both ends carry the same connection form, so the assembly can be fitted either way round.

Benefits

• working pressure 215 bar at nominal size DN 19
• reinforcement of two steel wire braids to EN 853 2 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 2.4 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 30x2 for the pipe connection 22 L, DKO / DKO

Applications

It is used in maintenance as a replacement for damaged lines of the same nominal size. According to the data sheet hydraulic oils on a mineral oil basis, vacuum (max. -0.83 bar), water, lubricants and fuels are approved.

Standards and conformity

The hose is built to EN 853 as type 2 SN and reinforced with two steel wire braids.