Push-in fitting, elbow design, male thread G 1/4", tube 10 mm, nickel plated brass, -20 bis +150

This push-in fitting is designed for the male thread G 1/4" and a tube of 10 mm outside diameter. The part accepts the tube without tools and holds it by the gripping claws. The operating pressure reaches from -0.95 bar to 15 bar. The elbow design turns the line by 90 degrees and saves installation length.

Benefits

• With tube diameter 10 mm the size is fixed, so no reworking of the line is required
• The operating pressure from -0.95 bar to 15 bar is released for this size
• The temperature range from -20 °C to +150 °C covers cold installation and warm machine surroundings
• Nickel plated brass as material covers the released range from -20 °C to +150 °C
• The change of direction by 90 degrees saves installation length ahead of the port

Applications

Pneumatic cylinders and valve terminals, control air lines inside the control cabinet, workshop distribution and service units, compressed air installation on machines and plants.

Standards and conformity

Only silicone free seals and lubricants are used during assembly.