Angled screw-on fitting G - Riegler K1143

Angled screw-on fitting G. This range covers 5 variants from 2.12 EUR. Select the version you need above.

Available variants

Shared technical data

About Male elbows

Elbow fittings take the line through 90 degrees and save space right at the cylinder or valve. Tube outside diameters from 4 to 12 mm are covered, with threads from M5 up to G 1/2 male.

What matters when choosing

• Identify the thread on the component first. Parallel threads run from M5 to G 1/2 male, tapered ones from R 1/8 to R 1/2 male, and female G 1/8, G 1/4 and G 1/2 are available as well.
• The hose sets the size. Outside diameters of 4 to 12 mm and inside diameters of 2 to 10 mm are listed, depending on whether the tube is pushed in or slid onto a barb.
• Material follows the medium and the surroundings. Nickel-plated brass and CW614N brass are the standard, POM, PA and polypropylene save weight, and stainless steel 1.4404, 1.4571 and PFA cover chemically demanding cases.
• Sealing material is a choice between NBR, silicone-free NBR and FKM (FPM). Silicone-free is mandatory wherever silicone contamination has to be ruled out in production.
• Maximum working pressure is given as 10 to 25 bar depending on design, operating pressure as 10 to 18 bar. For vacuum circuits the figures reach down to -0.98 bar.

Typical applications

• Connecting cylinders in tight positions where a straight fitting projects too far
• Manifolds and valve terminals inside control cabinets
• Grippers and handling axes with moving hose runs
• Vacuum circuits with suction cups working below atmospheric pressure
• Food and chemical environments where stainless steel or PFA is required

The group covers nickel-plated brass, CW614N brass, stainless steel 1.4404 and 1.4571, POM, PA, polypropylene and PFA, sealed with NBR, silicone-free NBR or FKM (FPM). The 163 items come from Italy, Germany, the United Kingdom and China.